A 20mm scale 1918 Fordson Model F Tractor
A 20mm scale 1918 Fordson Model F Tractor.
This model is a high resolution resin 3D print (0.05mm layers). Model is 46mm in length, approx 20mm high, so a 20mm figure on a base should just be able to see over it. The model is supplied unpainted, with the resin fully cured. Due to the fairly delicate nature of this model it will be shipped still attached to its supports, but it is printed in a special “tough resin” to give it some additional strength. You will need to remove supports and tidy up the model before priming. I recommend a standard cheap automotive plastic primer.
Base and miniatures not included.
Original STL model by Chryslerjunkandstuff available on Thingiverse.
Tips for preparing 3D printed models
|Dimensions||80 × 40 × 30 cm|